Cement-based material with low viscosity , good fluidity, high strength and good adhesion to mineral surfaces.
Application:
– for underfloor injection and foundation shoring
– for filling large voids and caverns (also in the ground)
– for structural strengthening injections of pipes and hoses
Properties:
– high strength parameters after setting (64 MPa after 28 days)
– low viscosity cement slurry
– long processing time
– can be used in dry, humid and wet environments
– swellable up to 0.5%
Centricreate EH consists of a powder component (binder material with additives) and water.
The components should be mixed in the correct proportions using a high-speed counter-rotating mixer IZOPRESS MIX to a homogeneous mass.
Injection should be carried out using IZOPRESS 500, IZOPRESS 600, IZOPRESS 700, IZOPRESS 900 injection pumps along with the use of IZOPRESS packers (12, 14, 16 or 18 mm diameter).
