CATALOGUE NR 01530

Double packer for mine workings and tunnels 102/470.

catalog no. 26838

Application:

Double packers are used for mining anchors, when the waterproof space between the arches of the excavation also needs to be grouted. The hole is made to such a depth and diameter that the rubber seals close the watertight space. The seals are spread by tightening 4 bolts, then it is possible to feed the anchor stabilizing material into the ground through one of two hoses ending in a slide-in injection valve. One of the hoses is used for feeding the material and the other for venting. Then proceed to inject the waterproofing space using a conduit with pan head nipple. In this way, it is possible to simultaneously plant the anchor and seal the space between the arches of the excavation.

Dimensions tailored to the individual requirements of the customer.

Recommended products

  • IZOPRESS 1/4" Valve with GEKA Connector, 30 cm Hose with pan head nipple Adapter
    CATALOGUE NR 20748

    IZOPRESS 1/4" Valve with GEKA Connector, 30 cm Hose with pan head nipple Adapter

    CATALOGUE NR 20748

    IZOPRESS 1/4" Valve with GEKA Connector, 30 cm Hose with pan head nipple Adapter

  • IZOPRESS 500 low-pressure pump for injecting hydrophobic solutions, cement slurries, silicone creams and silicone emulsions.
    CATALOGUE NR 06006

    IZOPRESS 500 low-pressure, pneumatic pump for cement-based injection materials, water-based solutions and injection creams

    CATALOGUE NR 06006

    IZOPRESS 500 low-pressure, pneumatic pump for cement-based injection materials, water-based solutions and injection creams